Connecting your wired device to your AP - Cisco Meraki MR36H Follow
MR36H
Wi-Fi 6 access point for smarter guest experiences
The ideal guest experience
- Integrated three-port gigabit switch with POE passthrough
- Three radios: 2.4 GHz, 5 GHz, and dual-band WIDS/WIPS
- Integrated Bluetooth® Low Energy radio
- Two MU-MIMO 802.11ax Wi-Fi 6 radios
- Up to 1.7 Gbps aggregate dual-band frame rate, 802.3af PoE compatible
Connecting your wired device to your AP
Your AP allows you to connect to the internet via wired access (using ethernet/LAN cable), and wirelessly(using wifi).
For wired connection, you will find 3 available LAN ports on the bottom side of your AP. Connect one end of your ethernet/LAN cable to your device and the other end to one of the LAN ports. You may connect on either one of the 3 ports to the right.
Also, ensure that your LAN port is enabled when connecting thru.
- Click on Windows Icon
- Select and click “Network & Internet”
- Click “Change adapter options”
- Right click on “Ethernet”, then “Status”
- If “Status” is Disabled, click on “Enable”