Connecting your wired device to your AP - Cambium XV2-22H Follow
Cambium XV2-22H
Enterprise grade software-defined access point
Cambium Networks Wi-Fi 6 wall plate access points (AP) put personal Wi-Fi in the room where people and devices connect. Designed for discreet installation on a flat wall surface or over a wiring box.
- Wallplate 802.11ax, 2×2
- 3 x GbE Ethernet, one with PoE out
- RJ45 electrical pass-through ports
- BLE/Zigbee/Thread/Matter
Connecting your wired device to your AP
Your AP allows you to connect to the internet via wired access (using ethernet/LAN cable), and wirelessly(using wifi).
For wired connection, you will find 3 available LAN ports on the bottom side of your AP. Connect one end of your ethernet/LAN cable to your device and the other end to one of the LAN ports.
Also, ensure that your LAN port is enabled when connecting thru ethernet.
- Click on Windows Icon
- Select and click “Network & Internet”
- Click “Change adapter options”
- Right click on “Ethernet”, then “Status”
- If “Status” is Disabled, click on “Enable”